Watch the video or read the instructions below:
Detaching the cover
1. Open the two zips at the back of the buggy.
2. Undo all the Velcro at the bottom of the buggy.
3. Lift the fabric and undo the Velcro on the side of the buggy, allowing the fold supports to pass through the cover.
4. Lift the fabric and undo the Velcro attached to the top two bars of the frame.
5. You can now lift the fabric off the frame and remove the bottom plate.
Attaching the cover
1. Place the base plate on the frame. Insert the safety tether through the hole in the fabric. Attach the Velcro on the front of the base plate over the bar of the frame. Fasten the Velcro on the back of the base plate over the support of the frame.
2. Lift the fabric of the cover and attach the Velcro to the top two bars of the frame.
3. Pass the fold supports on the side of the frame through the fabric of the cover and fasten Velcro tightly. Be sure the fabric is properly folded over the supports.
4. Fasten all the Velcro at the bottom of the buggy.
5. Close the two zips at the back of the buggy.