Watch the video or read the instructions below:
Detaching the cover
1. Using a cross-head screwdriver, unscrew the push bar screws and remove the push bar from the frame.
2. Open the two zips at the back of the buggy.
3. Undo all the Velcro at the bottom of the buggy.
4. On the inside of the cabin you will find two zips at the front, undo these.
5. Further inside the cabin there is a zip on the left and right side, undo these.
6. Lift up the cover. Undo the Velcro at the top and sides of the top bar of the frame.
7. Now undo the zip that attaches the base plate to the cover. If necessary, remove the base plate from the frame.
De hoes vastmaken:
1. Place the base plate on the frame, put the cover over the top of the frame and connect the two parts with the zip at the back of the buggy.
2. Fasten the Velcro to the top and sides of the top bar of the frame.
3. Fold the fabric over the frame. Fasten the zips on the inside of the cabin on the left and right sides.
4. Also fasten the two zips on the front inside of the cabin.
5. Now fasten all the Velcro at the bottom of the buggy.
6. Fasten the two zips at the back of the buggy.
7. Put the push bar back in place and fasten with the two screws.